Check a wiring diagram an check power an ground for those systems . Also read factory service information on how they work . Electronic modules involved . DDM - driver door module . If this vehicle came to my shop , first thing I do , hook up factory scan tool an check input data from the door switch to the DDM . Check DTC'S - diagnostic trouble codes .
The power windows system consists of the following components:
• Driver door module (DDM) -- GMLAN device that receives and transmits messages and signals for window functionality
• Passenger front door module (PDM) -- GMLAN device that receives and transmits messages and signals for window functionality
• Left rear door module (LRDM) -- GMLAN device that receives and transmits messages and signals for window functionality
• Right rear door module (RRDM) -- GMLAN device that receives and transmits messages and signals for window functionality
• Driver door switch assembly (DDSA) -- GMLAN device that contains the driver, front passenger, RR and LR window and window lockout switches
• Right front power window switch -- provides switched ground window switch signals to the PDM for the front passenger window
• Left rear power window switch -- provides switched ground window switch signals to the LRDM for the left rear passenger window
• Right rear power window switch -- provides switched ground window switch signals to the RRDM for the right rear passenger window
• Left front power window motor -- contains position sensors and a module that receives signals from the DDM and provides a status signal to the DDM
• Right front power window motor -- contains position sensors and a module that receives signals from the PDM and provides a status signal to the PDM
• Left rear power window motor -- contains position sensors and a module that receives signals from the LRDM and provides a status signal to the LRDM
• Right rear power window motor -- contains position sensors and a module that receives signals from the RRDM and provides a status signal to the RRDM
• DRIVER DR MOD fuse (10-amp)
• FRT PASS DR MOD fuse (15-amp)
• REAR DR MOD fuse (10 amp)
• Power Window Motors Circuit Breaker (30-amp)
Your best bet , take it to a qualified repair shop.
SOURCE: how do you set the
My car (Acura 3.5RL) has memory seats. What I do is set the seats and side view mirrors up the way I like, then press the driver #1 button and hold it until I hear a beep.
SOURCE: How to set memory on seats
adjust seat and steering to comfortable position press set and 1 on drivers door,position will be put into memory. put seat and steering into position that it is easy to get out of car, press exit 1 and the exit position will be in memory. do same procedure for driver2.
SOURCE: where is the oil filter located on a 2006 sts
the oil filter is not a regular looking filter, its a cartriage type that goes into a housing, if you open the hood and look on the driverside of motor near the oil fill cap you will see a cover cap with a nut shape head on top, use a 24mm socket on a rachet and unscrew the cover,then pullfilter out, install new filter and replace oring provide with filter on the cap. hope this helps.
Testimonial: "This was great. I found it immediatly."
SOURCE: how to change a headlight on a 2006 cadillac sts
To remove the headlight assembly you need to remove the front bumper cover. There are two bolts and one stud with a nut that hold the headlight in. Two of the fasteners are behind the bumper cover.If you remove these the headlight must come out.
SOURCE: The driver power seat on my 2005 Cadillac STS have
If non of the power controls for that seat are working, then I would check the plug under the seat and make sure it hasn`t come loose. Hope this helps
Please take a moment to rate my answer............Thanks
358 views
Usually answered in minutes!
×