Office Equipment & Supplies - Recent Questions, Troubleshooting & Support
My scansnap ix500 give me error #0x00044400 when
Right click on the ScanSnap Manager icon at the bottom right of your computer screen, go to "Scan Button Settings"
Then, go to the tab that says Paper. If you don't see it, click on details at the bottom left.
In paper, change multifeed detection to Check Length or None instead of Ultrasonic Sensor.
If this works, then the ultrasonic sensor on this scanner has failed. The only function is it detects if multiple pages go through at the same time by listening to the vibrations. Your scanner can still scan fine without it.
Good afternoon. My Lexmark 792 printer shows error 956.02 at startup when adjusting colors, how can I solve it?
The 956.02 error on your Lexmark 792 printer indicates a system board issue. Troubleshoot it step by step:
Power off the printer: Turn off the printer and allow it to remain powered off for 10 to 20 seconds before turning it back on.
Check the code level:
You can identify the current code level using either of the following methods:
Method 1: Print the Menu Settings Page:
Touch the Menu button on the printer's operator panel.
Select Reports.
Choose Menu Settings Page to print the page.
Look for the code level under Device Information.
Method 2: Use the Printer's Embedded Web Server (EWS):
Open a web browser (such as Internet Explorer) and enter the printer's IP address.
Click on Reports and then select Device Information.
Download and install the latest firmware:
If your printer's code level matches any of the following:
For C792: LHS1.HC.P129 or LHS1.HC.P130
For X792: LHS1.MR.P131, LHS1.MR.P135, or LHS1.MR.P135a
For X925: LHS1.HK.P136a
Proceed to download and install the latest firmware.
If your printer's code level matches any of the following:
For C792: LHS1.HC.P131 or later
For X792: LHS1.MR.P135b or later
For X925: LHS1.HK.P136b or later
Contact Lexmark Technical Support for service.
Update the firmware:
Download the latest firmware from the Lexmark Support website.
Save the file and extract it to the same directory.
Use the appropriate Authorization Keycode:
For Lexmark C792: c792
For Lexmark X792: x792
For Lexmark X925: x925
Update the firmware using one of the following methods:
Embedded Web Server (EWS): Open a browser, enter the printer's IP address, and select Settings > Update Firmware.
USB utility: Follow the detailed steps for updating via USB flash utility.
USB thumb drive: Refer to the steps for updating using a USB thumb or flash drive.
FTP: Follow the steps for updating via FTP.
If you need further assistance, please contact Lexmark Technical Support. When calling, have your machine/model type and serial number (SN) ready.
956.01 system board error ' Lexmark C792
Error Codes > Lexmark > X792dtse > Code 956.02 (printcopy.info)
Resetting Printer Chip
Check your reference book[on the Cd] to try to determine the cause of the particular error.
If you have used ssc[righ click on the icon in the tool bar] and thern reset all.
Also take a look at www.fixyourownprinter,com
and type Epson stylus C86 in the search bar.
Not finding what you are looking for?